دانلود کتاب | دانلود حل المسائل » Fouling and pressure drop analysis of milk powder deposition on the front of parallel fins

 
اخبار
» همه‌ی اخبار » فید اخبار
دانلود شاپ ، فروشگاه دانلود . روشی آسان برای کسب در آمد شما میتوانید با استفاده از دانلود شاپ ، موزیک ، فیلم ، تصویر ، قالب ، کتاب ، کلیپ و هر آنچه دانلود شدنی است بفروشید !
تخفیف 40 درصدی بانک مقاله
معرفی
دانلود کتاب , بانک مقاله , دانلود مقاله , دانلود سوال امتحانی , دانلود کنکور آزمایشی , بانک کتاب , کنکور****
توجه به محدودیت ها و عدم دسترسی به بسیاری از پایگاه های داده علمی معتبر، تارنمای http://www.bank-paper.ir در مردادماه سال 1392 جهت پاسخگویی به این نیاز دانشجویان، اساتید و پژوهشگران گرامی تاسیس شد. ما تمام تلاش خود را برای دسترسی به بالاترین سطح دسترسی به پایگاهای داده های علمی معتبر روز دنیا به کار می‌گیریم. امید به این است نظرات شما کاربران عزیز در هرچه بهتر شدن این تارنما مفید باشد . لازم به ذکر می باشد که فقط برای کتب فارسی ، عبارت " کتاب فارسی " درج شده است .در هنگام خرید دقت کنید مبلغ به هیچ وجه بازگشت داده نمی شود .
پشتیبانی
    شماره پیامک : 30002223763522

    ایمیل پشتیبانی : info@bank-paper.ir

موضوعات
نظرسنجی سایت

تصویر ثابت

   Fouling and pressure drop analysis of milk powder deposition on the front of parallel fins

شنبه , 30 شهریور 1392 ساعت 23:10 دسته بندی : علم های فیزیک و ریاضیات و مهندسی ,

دانلود مقاله : 

Fouling and pressure drop analysis of milk powder deposition on the front of parallel fins 2013

نویسندگان : 

T.G. Walmsley  , M.R.W. Walmsley, M.J. Atkins, J.R. Neale

چکیده : 

One method to reduce the energy consumption of industrial milk spray dryers is to recover waste heat

from the exhaust dryer air. A significant challenge associated with this opportunity is the air contains

a small amount of powder that may deposit on the face and surfaces of a recuperator. This paper introduces

a novel lab based test that simulates powder deposition on a bank of parallel plate fins at exhaust

dryer air conditions. The fin bank acts like the face of a typical finned tube row in a recuperator. The aim

of this study is to look at how deposition on the front of fins is affected by the air conditions. Results show

similar characteristics to other milk powder deposition studies that exhibit a dramatic increase in deposition

once critical stickiness levels are reached. As powder deposits on the face of the fins, the pressure

drop across the bank increases until eventually an asymptote occurs, at which point the rates of deposition

and removal are similar. For very sticky conditions, deposition on the face of the fins can cause a rise

in the pressure drop by as much as 65%. The pressure drop has also been successfully related to the percentage

of open frontal area of the fins with and without deposition. Deposition inside and at the rear of

the fin bank was found to be minimal.

?>

دانلود - 750 تومان

Fouling Deposition Milk powder Heat recovery
مطالب مرتبط :
Two efficient algorithms for computing the characteristics of a subsegment of a digital straight line
A comprehensive assessment of the life cycle energy demand of passive
A multi-stage, multi-reaction shrinking core model for self-inhibiting gas–solid reactions
The case for massive, evolving winds in black hole X-ray binaries
Unit commitment problem with ramp rate constraint using a binary-real-coded genetic algorithm
Effect of carbon content and calcination temperature on the electrochemical performance of lithium iron phosphate/carbon composites as cathode materials for lithium-ion batteries
A quasisecant method for solving a system of nonsmooth equations
Coloringplanarhomothetsandthree-dimensionalhypergraphs
Effect of sputtering parameters and substrate composition on the structure of tantalum thin films
Polarization of modified titanium and titanium–zirconium creates nano-structures while hydride formation is modulated
Design andsimulationofGaNbasedSchottkybetavoltaicnuclear micro-battery
Modeling a mixed-integer-binary small-population evolutionary particle swarm algorithm for solving the optimal power flow problem in electric power systems
Si-based thin film coating on Y-TZP: Influence of deposition parameters on adhesion of resin cement
The influence of Mn species on the SO2 removal of Mn-based activated carbon catalysts
Model selection in kernel ridge regression
Adaptive score level fusion of fingerprint and voice combining wavelets and separability measures
Makespan minimization for two parallel machines scheduling with a periodic availability constraint: Mathematical programming model, average-case analysis, and anomalies
Buffering intermittent renewable power with hydroelectric generation: A case study in California
Global weak solutions to the Vlasov–Poisson–BGK system for initial data in Lp(R3 × R3)
Parameter estimation of solar cells and modules using an improved adaptive differential evolution algorithm
Discharge of rapeseeds from a model silo: Physical testing and discrete element method simulations
Vulnerability of long-term memory to temporal delays in amphibians
Rapid, accurate time estimation in zebrafish (Danio rerio)
Configurable model for real-time crane erection visualization
Theoretical investigation on the Pt(II)-catalyzed tandem migration reactions of propargylic carboxylates
Computational calculation of absolute aqueous pKa values for phenols
Permanent dipole moments and energies of excited states from density functional theory compared with coupled cluster predictions: Case of para-nitroaniline
An approximate approach to calculate the potential acting on an electron in a molecule and construct the molecular face
Computational study of carbon–hydrogen bond deprotonation by alkali metal superbases
Moiré patterns on STM images of graphite induced by rotations of surface and subsurface layers
Structural models of activated c-alumina surfaces revisited: Thermodynamics, NMR and IR spectroscopies from ab initio calculations
BPX-preconditioning for isogeometric analysis
Variational integrator for fractional Euler–Lagrange equations
The constitutive compatibility method for identification of material parameters based on full-field measurements
Mathematical programming approaches for obtaining sharp collapse load bounds in interval limit analysis
The exact stability stiffness matrix for the analysis of multi-cracked frame structures
Longitudinal fluid flow and heat transfer between an elliptical hollow fiber membrane tube bank used for air humidification
An iterative splitting approach for linear integro-differential equations
A hybrid metaheuristic approach for the capacitated p-median problem
Characterization and hypoglycemic effect of a polysaccharideextracted from the fruit of Lycium barbarum L
Spinning of hydroalcoholic chitosan solutions
Preparation, characterization, and in vitro efficacy ofO-carboxymethyl chitosan conjugate of melphalan
Design and implementation of a fs-resolved transmission electron microscope based on thermionic gun technology
Uncovering molecular relaxation processes with nonlinear spectroscopies in the deep UV
On the use of crystal vibrational modes in the estimation of the anisotropic displacement parameters of hydrogen atoms in molecular crystals: para-Nitroaniline as a test case
The helical propensity of KLA amphipathic peptides enhances their binding to gel-state lipid membranes
Progressive failure analysis of shallow foundations on soils with strain-softening behaviour
A viscoplastic constitutive model for unsaturated geomaterials
Sand–pipeline–trench lateral interaction effects for shallow buried pipelines
On rational approximation of a geometric graph
Polygonal estimation of planar convex-set perimeter from its two projections
Improved interpretation of solar wind ion measurements via high-resolution magnetic field data
The accuracy of data from ionosondes for the estimation of hmF2 and the identification of global change in the ionosphere
Hydrocode modelling of hypervelocity impacts on ice
Morphology of the G condition occurrence over Irkutsk
Chlorella vulgaris culture as a regulator of CO2 in a bioregenerative life support system
Estimation of the Love and Shida numbers: h2, l2 using SLR data for the low satellites
Applications of the admissible region to space-based observations
Two-dimensional phase plane structure and the stability of the orbital motion for space debris in the geosynchronous ring
Combining frequency and time domain models to forecast space weather
A new ionospheric tomography model combining pixel-based and function-based models
Different mechanisms controlling interannual phytoplankton variation in the South China Sea and the western North Pacific subtropical gyre: A satellite study
Semi-automatic land consolidation software based on geographic information systems
Voice discrimination in four primates
Robust multi-objective maintenance planning of deteriorating bridges against uncertainty in performance model
A correction of E-model in quality estimation of packetized speech signal
On fuzzy-rough attribute selection: Criteria of Max-Dependency, Max-Relevance, Min-Redundancy, and Max-Significance
SOLARCALC 7.0: An enhanced version of a program for the analysis of hemispherical canopy photographs
Drift evaluation tool to raise awareness and support training on the sustainable use of pesticides by drift mitigation
A computational study of the water-catalyzed reaction of chlonitromethane with the OH radical
A detailed study on thiocarbonyl ene reactions
A theoretical study of the conformation and dynamic properties of 1,5-benzodiazepines and their derivatives
Pd/Au(100) alloy for vinyl acetate synthesis: Effects of surface properties on reagents adsorption
DFT investigation of the intermolecular interactions of a thieno-separated tricyclic guanine analog with gold nanoclusters
Theoretical study on thermal decomposition kinetics of allyl formates in the gas phase
Improvement of antioxidative activity of resveratrol by elongating conjugated chain: A DFT theoretical study
On the power of permitting features in cooperating context-free array grammar systems
Topological relations between separating circles
Discrete tomography determination of bounded lattice sets from four X-rays
Bounds on the quality of reconstructed images in binary tomography
Complexity results for reconstructing binary images with disjoint components from horizontal and vertical projections
Analysis of structures convertible to repeated structures using graph products
Statistical procedures for the market graph construction
On diagnostics in double generalized linear models
Estimation of the axial behaviour of masonry walls based on Artificial Neural Networks
Approximating hitting sets of axis-parallel rectangles intersecting a monotone curve
ON THE VERLINDE FORMULAS FOR SO(3)-BUNDLES
PROJECTIVITY OF BANACH AND C ∗-ALGEBRAS OF CONTINUOUS FIELDS
MODULI OF REPRESENTATIONS OF FINITE DIMENSIONAL ALGEBRAS
Comparative assessment of feature selection and classification techniques for visual inspection of pot plant seedlings
A hardware method for time-stamping asynchronous serial data streams relative to GNSS time
Hyperspectral indices for assessing damage by the solenopsis mealybug (Hemiptera: Pseudococcidae) in cotton
Predicting UV sky for future UV missions
Dependence of fractal dimension of DLCA clusters on size of primary particles
Effects of higher wall roughness on dense particle–laden dispersion behaviors
An additive penalty P-Spline approach to derivative estimation
Bandwidth selection in marker dependent kernel hazard estimation
Bayesian diagnostics of transformation structural equation models
Timeout from a high-force requirement as a reinforcer: An effectiveprocedure for human operant research
Body contact and synchronous diving in long-finned pilot whales
The novel, one step and facile synthesis of ZnO nanoparticles using heteropolyoxometalates and their photoluminescence behavior
An analytical model of soil–structure interaction with swelling soils during droughts
Debris flow hazard mitigation: A simplified analytical model for the design of flexible barriers
Large deformation elastic electro-osmosis consolidation of clays
Finite-difference model for one-dimensional electro-osmotic consolidation
Laterally loaded rigid piles with rotational constraints
A nonparametric measure of local association for two-way contingency tables
Estimation and empirical likelihood for single-index models with missing data in the covariates
Analysis of space–time relational data with application to legislative voting
Discovery of the astatine, radon, francium, and radium isotopes
Energies, wavelengths, and multipole transition probabilities for B-like Fe and Ga ions
Non-strictly black body spectrum from the tunnelling mechanism
Supersymmetric descendants of self-adjointly extended quantum mechanical Hamiltonians
Universality of entanglement creation in low-energy two-dimensional scattering
Thermal stability of silica-coated magnetite nanoparticles prepared by an electrochemical method
Microstructural characterization of medical-grade stainless steel powders prepared by mechanical alloying and subsequent annealing
Continuous float–sink density separation of lump iron ore using a dry sand fluidized bed dense medium
Modeling collective dynamics of particulate systems under time-varying operating conditions based on Markov chains
CFD–DEM investigation of particle separations using a sinusoidal jigging profile
A novel experimental technique to determine the heat transfer coefficient between the bed and particles in a downer
An experimental investigation of aqueous-phase synthesis of magnetite nanoparticles via mechanochemical reduction of goethite
Modelling powder mixing in mass flow discharge: A kinematic approach
Correlation between the capacitor performance and pore structure of ordered mesoporous carbons
Fouling and pressure drop analysis of milk powder deposition on the front of parallel fins
Influence of the hydrophobic force model on the capture of particles by bubbles: A computational study using Discrete Element Method
Cohesion of lactose powders at low consolidation stresses
A Fourier finite volume element method for solving two-dimensional quasi-geostrophic equations on a sphere
Numerical stability of explicit Runge–Kutta finite-difference schemes for the nonlinear Schrödinger equation
Strong solutions of a class of hybrid diffusion processes with state-dependent regime-switching
DFT/TD-DFT studies on structural and spectroscopic properties of metalloporphyrin complexes: A design of ruthenium porphyrin photosensitizer
Computational study on the radical reaction C4H + C4H10
Particle finite element analysis of large deformation and granular flow problems
Upper bound finite element analysis of slope stability using a nonlinear failure criterion
Localization of disordered bosons and magnets in random fields
Purified discord and multipartite entanglement
Dynamical model for longitudinal wave functions in light-front holographic QCD
Superfluidity and collective modes in Rashba spin–orbit coupled Fermi gases
Influence of the hydrophobic force model on the capture of particles by bubbles: A computational study using Discrete Element Method
Cohesion of lactose powders at low consolidation stresses
Upper bound finite element analysis of slope stability using a nonlinear failure criterion 2013
Modeling tunneling-induced ground surface settlement development using a wavelet smooth relevance vector machine
Improving dynamic soil parameters and advancing the pile signal matching technique
دانلود مقاله Bodyguard manipulation in a multipredator context: Differentprocesses, same effect
دانلود مقاله Habitat richness affects home range size in a monogamous largerodent
دانلود مقاله Parallel astronomical data processing with Python: Recipes for multicore machines
دانلود مقاله Practices in source code sharing in astrophysics 2013
دانلود مقاله : A real–integer–discrete-coded differential evolution 2013
دانلود مقاله Inexact arithmetic considerations for direct control and penalty methods: American options under jump diffusion
دانلود مقاله Minimal residual methods for large scale Lyapunov equations
راهنمای خرید
ابتدا برروی گزینه دانلود کلیک کنید ، سپس به صفحه انتخاب بانک منتقل میشوید ، آدرس ایمیل خود را وارد کنید ، بانک مورد نظر را انتخاب کنید ، سپس برروی رفتن به درگاه پرداخت کلیک کنید . بعد از وارد کردن اطلاعات بانکی و پرداخت ، به سایت برگردانده میشوید ، لینک دانلود به شما داده میشود . این لینک تا 24 ساعت قابل استفاده خواهد بود . همچنین با استفاده از کد پیگیری و آدرس ایمیل داده شده میتوانید ، از قسمت پیگیری به مدیر سایت تیکت بزنید .
جستجوی مقاله و سوال
برای جستجو کافیست بخشی از موضوع مورد نظر خود را وارد کنید
تبلیغات

خرید از شما
در راستای بهبود کیفیت سایت در نظر داریم فایل های شما از جمله پروژه ( آمار ، کارافرینی و . . .) و دیگر موارد را خریداری کنیم . توجه داشته باشید فایل های موجود در اینترنت که به صورت رایگان یا پولی می باشد را به هیچ وجه خریداری نمی شود . روند به اینصورت می باشد که قسمتی از فایل را برای ما ارسال کرده در صورت تایید کیفیت و تکراری نبودن ، از شما خریداری می شود . برای تماس با از طریق زیر اقدام فرمایید : ایمیل : info@bank-paper.ir یا استفاده از فرم تماس با ما
پیگیری خرید و ارسال تیکت
ایمیل شما :
کد پیگیری : 
اخبار دانشگاهی واستخدامی
امکانات سایت

کلیه حقوق این وبسایت متعلق به Bank-paper.ir است .
هر گونه کپی برداری از مطالب ، محصولات ، قالب و سایر اجزای سایت طبق ماده 12 قانون جرائم رایانه‌ای پیگرد قانونی خواهد داشت و با متخلف به روشهای گوناگون برخورد خواهد شد .
 
به بانک مقاله امتياز دهيد

به اين صفحه امتياز دهيد

با تشکر از حمايت شما